MST

Morphing Shield Technology

A dynamic gas shielding system that envelops the melt pool in high-purity argon. Flow rate and coverage adapt automatically based on deposition geometry.

Section-based argon gas control

Activation of 20ppm oxygen in 60 seconds

RT-MCT

Real-time Teamperature Measurement & Control Technology

Trailing oxidation happens when your melt pool outgrows your shield. RT-MCT’s thermal camera monitors melt pool length in real-time and adjusts laser power to keep it within the protected zone — automatically.

[data-wf-bgvideo-fallback-img] { display: none; } @media (prefers-reduced-motion: reduce) { [data-wf-bgvideo-fallback-img] { position: absolute; z-index: -100; display: inline-block; height: 100%; width: 100%; object-fit: cover; } }

Unmatched oxidation control.

Below 20ppm oxygen level in 60 seconds.

Setup time just got a lot faster.

Chamber inertization often takes up to days. Print interruptions require complete restart.
Optimize process timeline with a MST that only takes 60seconds to reach 20ppm.

MST delivers material data that meet ASTM standards.

Pristine material qualities that passes ASTM standards.

Oxygen Content

Surface Rouchness

Comparison of Ti-6Al-4V Material Properties Under Various Inert Environment Conditions (As-Built)

[References] 
1. Procedia CIRP Volume 124, 2024, Pages 254-256 “Additive Manufacturing of Ti-6Al-4V with laser-wire DED and local shielding gas protection”
2. Physics Procedia 39 ( 2012 ) 416 – 424 “Material properties of Ti6Al4V parts produced by laser metal deposition” VITO (Flemish Institute for Technological Research), Materials Technology, Boeretang 200, 2400 Mol, Belgium
3. Degree Project in Materials Design and Engineering, Second cycle, 30 Credits Stockholm, Sweden 2018 “Effect of oxygen concentration in build chamber during laser metal deposition of Ti-64 wire”
4. LabAM24 conducted tensile strength testing through a third-party accredited analysis institution.

Build without chambers,
constraints, or limitations.

Let's work together

Whether you're scaling production, developing new alloys, or pushing part-size boundaries — we'll configure around your workflow.

Chamber-grade oxidation control in ambient air

MST

Morphing Shield Technology

Section-based argon gas control

Activation of 20ppm oxygen in 60 seconds

RT-MCT

Real-time Teamperature Measurement & Control Technology

Unmatched oxidation control.

Below 20ppm oxygen level in 60 seconds.

Setup time just got a lot faster.

Chamber inertization often takes up to days. Print interruptions require complete restart.
Optimize process timeline with a MST that only takes 60seconds to reach 20ppm.

MST delivers material data that meet ASTM standards.

Pristine material qualities that passes ASTM standards.

Oxygen Content

Surface Rouchness

Comparison of Ti-6Al-4V Material Properties Under Various Inert Environment Conditions (As-Built)

Featured News

Featured in Additive manufacturing Media at Formnext 2025

LabAM24 joins KASA SBIR Phase

LabAM24 receives research grant from the U.S. Air Force

Build without chambers,
constraints, or limitations.

Let's work together

Whether you're scaling production, developing new alloys, or pushing part-size boundaries — we'll configure around your workflow.

Technology

Product

Research

Resources

Company

Floor 1 Suite 112, 187, Techno 2-ro,
Yuseong-gu, Daejeon, Republic of Korea

TEL: +82 70 4407 0306

© 2026 LabAM24 All Rights Reserved

Chamber-grade oxidation control in ambient air

MST

Morphing Shield Technology

Section-based argon gas control

Activation of 20ppm oxygen in 60 seconds

RT-MCT

Real-time Teamperature Measurement & Control Technology

Unmatched oxidation control.

Below 20ppm oxygen level in 60 seconds.

Setup time just got a lot faster.

Chamber inertization often takes up to days. Print interruptions require complete restart.Optimize process timeline with a MST that only takes 60seconds to reach 20ppm.

MST delivers material data that meet ASTM standards.

Pristine material qualities that passes ASTM standards.

Oxygen Content

Surface Rouchness

Comparison of Ti-6Al-4V Material Properties Under Various Inert Environment Conditions (As-Built)

Featured News

Featured in Additive manufacturing Media at Formnext 2025

LabAM24 joins KASA SBIR Phase

LabAM24 receives research grant from the U.S. Air Force

Build without chambers, constraints, or limitations.

Let's work together

Whether you're scaling production, developing new alloys, or pushing part-size boundaries — we'll configure around your workflow.

Technology

Product

Research

Resources

Company

Floor 1 Suite 112, 187, Techno 2-ro, Yuseong-gu, Daejeon, Republic of Korea

TEL: +82 70 4407 0306

© 2026 LabAM24 All Rights Reserved

Chamber inertization often takes up to days. Print interruptions require complete restart.
Optimize process timeline with a MST that only takes 60seconds to reach 20ppm.

Build without chambers,
constraints, or limitations.

Floor 1 Suite 112, 187, Techno 2-ro,
Yuseong-gu, Daejeon, Republic of Korea